球王会买球下载-球王会（中国）

SD NAND Flash is an embedded storage solution for low-power application.The SD NAND consists of theNAND flash and the high-performance controller with the LGA package.3.3V supply voltage (VCC)is required for the NAND area.The SD NAND Flash is based on an advance 8-pin interface (clock,command,Data*4,power and ground).The SD NAND Flash is fully compliant with SD2 .0/SD3 .0 interface and operation is similar to SD card.

? Advance

? Advanced dynamic ECC engine to improve reliability

? Copyrights Protection Mechanism--Complying with highest security of SDMI standard

? Low power consumption,with the standby energy saving management mode automatically

? High-speed Flash Controller inside

? Interface

? Support clock frequencies 50MHz

? Complies to SD specifications version 2.x/3.x with 1-I/O and 4-I/O

? Supports SPI Mode

? Support UHS-I (SDR50,SDR104,DDR50)

? Power Supply and Consumption

? Voltage range:2.7V ~3.6V

? Standby:100uA (Typical)

? Operating current:40mA(Typical)

? Temperature

? Operation:-40^OC to 85^OC

? Storage:-65^OC to 150^OC

? Reliability

? P/E cycles with ECC:100K

? MTBF:1,000,000hours

Note:The 1Gb-4Gb capacity only supports a clock of 50MHz and is an SD2 .0 interface.